About
Born and raised in rural Central New York, my first chapter of life was focused on drums and percussion. I earned a B.M. from SUNY Fredonia and pursued a performing and teaching career for two decades. I was bitten by the expedition sailing bug while living in NYC, and a move to Seattle brought focus and culture to this new passion. While working at a local game store, I developed my skills sailing and living aboard small boats. Other pursuits include expository and experiential maritime writing, SCUBA diving, canoe sailing, marlinspike, and bicycling.
I hold an Inland 100-Ton Master’s and 25-Ton Near Coastal Master’s license with sail and towing endorsements. I have lived aboard the Pacific Seacraft Flicka 20, Sampaguita, first in the Washington Ship Canal in Ballard, then in Port Townsend, WA, and have voyaged to Mexico and the Marquesas and back with her.
I have circumnavigated BC, Canada’s Vancouver Island twice single-handed aboard Sampaguita, and have extensively cruised the Pacific Northwest, including Southeast Alaska and Kodiak. In 2019, I sailed aboard Olivier Huin’s Breskell from Newfoundland to Port Townsend via the Northwest Passage.
contact info: sailingwithjosh@gmail.com
.
sailingwithjosh
Sailing With Josh 
wow! Windward Pilgrim is pictured so nicely ! Have a good trip! -John Hazen
LikeLike
John, your an inspiration!
LikeLike
Have an eighty-two flica with diesel and no head. I sail alone a lot and do not find the size with full stand-up headroom all that restrictive. What I do find is that I have a boat that I have tremendous confidence in and one that can handle the rough stuff when it comes to weather which not many 20footers with an eighteen ft waterline can do.
LikeLike
Gary, Thank you for reading. Some of us don’t need much room for comfort. I hope you continue to enjoy your Flicka. What’s the name, hull ID and location?
LikeLike
Hello Josh,
I have really enjoyed reading your blog and following your stewardship of Sampaguita. You have inspired me to take another crack at removing the tangs on my mast as you discussed in your blog – I think I needed more heat to encourage separation of the components. What is Sampaguita’s hull number and have you any information on which mast was used on early to mid 1980s Flickas? I may need to order a new compression tube and inserts. Cheers and fair leads with big blocks – Jamie White http://www.thesquarerigger.com
LikeLike
Jamie, Thanks again for the kind words. Sampaguita is hull #317. I sussed the mast to be a Kenyon 3350 MORC as per RigRite. https://www.rigrite.com/Spars/Kenyon_Spars/KENYON.php
Last I checked they have the inserts, called flange bushings. And compression tubes somewhere too. But any machinist can get those for you.
https://www.rigrite.com/Spars/SparParts/Tangs-complete/Flange_bushings.php
They are the 11/16th ones which is an unfortunate size. The corresponding tangs aren’t available anymore, so if you want to replace them its make your own or modify to a different size. No one does that odd size anymore. It makes swapping out complicated. I did that with the lower tangs and have something completely different going on there now. I didn’t like the alignment the dogbone tangs were giving me. I haven’t written about it yet. There are work arounds, but you can handle it.
RigRite is new old stock. I ordered a few things with mixed feelings. The sheaves I ordered for the reef lines in the boom had seen a little UV from sitting on the shelf somewhere all these years, I think. Two were pretty good and two were ho-hum. I ordered a round bar traveler that was excellent. Wilcox-Crittenden, but not the Schaefer on most Flickas. It works though. It was in a box all these years, while the other sheaves were in plastic baggies.
LikeLiked by 1 person
Thanks for the information on our masts…I think I will try to renew the lower tangs at my next haulout! My Flicka “Dulcinea” is hull number 302 and should have the same mast as your beautiful Flicka has. Your blog and articles in various sailing publications are a fantastic resource and very much appreciated by all! Would enjoy sharing a pint or coffee one of these days. Please give me a shout if you are ever in the San Francisco Bay area – would enjoy taking you for a sail on Dulcinea sometime.
LikeLiked by 1 person
Josh, do you know anyone with the original kit plans for the Flicka? I’ve tried many places and cannot get my hands on anything.
LikeLike
Tristan, I do not. Bruce Bingham lives in Florida, maybe he would know. Did you ask on the Flicka FB and Yahoo forum?
LikeLike
I did, Bruce passed in Nov of 2022 unfortunately. I’ll keep
hunting! This site is a fantastic inspiration, thanks Josh!
LikeLike
I hadn’t heard about Bruce, but I haven’t been on the Flicka Forums for a while. If you can ever pick up a copy of his Sailor’s Sketchbook, it’s awesome. About the plans. Ironically, it turns out my sailmaker has offered me a set of Flicka plans. I don’t yet have in hand, so I don’t know for sure what that means. I’ll get back to you when I have them in hand.
LikeLike
Funny about the plans! I picked up Bruce’s book about Ferro-cement construction and it is fantastic. I’ll definitely pick up the Sailor’s Sketchbook. Thanks for the response, curious to hear if the plans materialize.
LikeLike